Violin PartsThis section contains the easily replaceable parts of a Violin that need replacing because they have worn out, broken or just look a bit old & dowdy. You'll find a Chin Rest, Violin Bridge, Violin Pegs, Fine Tuners, Tailpiece, End Button Saddles, fingerboard and cleaning materials, everything you'll need to renovate your Violin. |
You can purchase immediately using your credit card. Just click on the add to basket button. |
Violin Parts | |||||
Model - Ebony Nut Pre-shaped nut of good quality Ebony. Much darker than the photograph. Will need final fitting to the violin before use.
| ![]() |
||||
| | |||||
Model - PlainButton Good quality plain ended violin button, Made from A grade Ebony and finished to a high polish. Will need fitting to the existing hole in your violin.
| ![]() |
||||
| | |||||
Model - EbonySaddle Part shaped Saddle of good quality Ebony that is a bit darker than in the photograph. Will need a fair bit of shaping though the basic top shape is already in place.
| ![]() |
||||
| | |||||
Model - FineTunerBlack1/2(1) A single Fine Tuning Adjuster for 1/2 Size violin. Good quality painted black. Fine tuners are often fitted to the E string which is normally a steel string and difficult to tune without a fine tuner
| ![]() |
||||
| | |||||
Model - Button Paris Nice quality end button with an attractive paris eye. Will need some slight adjusting to fit the violins existing end button hole and taper. A nice embelishment to your violin.
| ![]() |
||||
| | |||||
Model - Plain Peg(1) Single good quality plain Ebony peg. Suitable for 4/4 violin, other sizes available please email for more information. Will need adjusting to the violin pegbox taper before use.
| ![]() |
||||
| | |||||
Model - FineTunerBlack(1) A single Fine Tuning Adjuster suitable for fitting to our Ebony and boxwood tailpieces. Good quality painted black. Fine tuners are often fitted to the E string which is normally a steel string and difficult to tune without a fine tuner.
| ![]() |
||||
| | |||||
Model - NickelTuner(1) A single Nickel Plated Fine tuner, by Wittner, to fit on a standard violin tailpiece. Fine tuners are normally fitted the E string which is normally a steel string and difficult to tune without a fine tuner.
| ![]() |
||||
| | |||||
Model - RubberMute Wittner Rubber Mute. Clips onto the A and D string behind the bridge and rests by the tailpiece when not needed. Just slide it forward and clip it onto the bridge when you do need it.
| ![]() |
||||
| | |||||
Model - FineTuneGold Good quality Wittner Fine Tuner for fitting to a standard tailpiece. Black with Gold plated knurled adjuster.
| ![]() |
||||
| | |||||
Model - EbonyMute Three legged Ebony Mute. Nicely carved and finished. Provides a substantial reduction in sound when fitted to the violin bridge.
| ![]() |
||||
| | |||||
Model - RoseMute A nicely finished three legged curved mute carved from rosewood. Provides a substantial reduction in sound from the violin when fitted to the bridge.
| ![]() |
||||
| | |||||
Model - PrimaBridge1/2 Partially fitted violin Bridge. Good quality Maple. On most violins they just need minor trimming of the feet for a good fit. 1/2 Size
| ![]() |
||||
| | |||||
Model - PrimaBridge1/4 Partially fitted violin Bridge. Good quality Maple. On most violins just needs minor trimming of the feet for a good fit. 1/4 Size
| ![]() |
||||
| | |||||
Model - PrimaBridge1/8 Partially fitted violin Bridge. Good quality Maple. On most violins just needs minor trimming of the feet for a good fit. 1/8 Size
| ![]() |
||||
| | |||||
Model - PrimaBridge3/4 Partially fitted violin Bridge. Good quality Maple. On most violins they just need minor trimming of the feet for a good fit. 3/4 Size
| ![]() |
||||
| | |||||
Model - PrimaBridge4/4 Partially fitted violin Bridge. Good quality Maple. On most violins they just need minor trimming of the feet for a good fit. 4/4 Full Size
| ![]() |
||||
| | |||||
Model - FineTunerBlack1/2(4) Set of four fine tuners suitable for use on a 1/2 size violin. These are painted all Black.
| ![]() |
||||
| | |||||
Model - PlainRosePeg A set of four high quality Rosewood Pegs. Beautifuly finished and made from very good quality wood. They will need fitting to the taper of your violin - 4/4 size - other sizes available please email to enquire.
| ![]() |
||||
| | |||||
Model - FineTunerBlack(4) Set of four fine tuners suitable for use on our Ebony and Boxwood tailpieces. These are painted Black.
| ![]() |
||||
| | |||||
Model - Plain Peg(4) Set of four good quality plain ebony pegs, suitable for 4/4 violin. Other sizes available, please email for information. Will need fitting to the pegbox of the violin.
| ![]() |
||||
| | |||||
Model - NickelTuner(4) Set of 4 Wittner Nickle Plated Fine tuners to fit on a standard violin tailpiece. Fine tuners are normally fitted when steel strings are used as they are difficult to tune without a fine tuner.
| ![]() |
||||
| | |||||
Model - SoundPost3/4 Sound Post Material 3/4. A length of good quality Spruce specially machined so as to be suitable for the soundpost of a 3/4 size violin. Diameter 5.7mm, length 400mm approx. enough for about 6 violins.
| ![]() |
||||
| | |||||
Model - SoundPost4/4 Sound Post Material 4/4. A length of good quality Spruce specially machined so as to be suitable for the soundpost of a full size violin. Diameter 6.2mm, length 400mm. enough for about 6 violins.
| ![]() |
||||
| | |||||
Model - PlainBoxPegs A set of four good quality Boxwood pegs. These are made of really nice wood and beautifully finished. They will need fitting to the taper of your existing violin - 4/4 size, other sizes available please email to enquire.
| ![]() |
||||
| | |||||
Model - BoxTailpiece Attractive tailpiece made from polished boxwood, with an ebony insert to stop the string. Our fine tuners will fit this if required.
| ![]() |
||||
| | |||||
Model - EbonyTailpiec Good quality Ebony plain tailpiece. Nicely made and quite light in weight. Suitable for use with our fine adjusters. Comes complete with Nylon Tailgut.
| ![]() |
||||
| | |||||
Model - Tailpiece4/4 Standard light alloy tailpiece with a fine tuner on each string. Includes a Nylon tailgut with screw end adjustment. Standard replacement for most Student Violins. Full Size 4/4
| ![]() |
||||
| | |||||
Model - StdTailpiece1/2 Standard light alloy tailpiece with integral fine tuners. Slightly better quality than the ones fitted to the average Chinese Student violin. Comes complete with Nylon Tailgut - 1/2 Size
| ![]() |
||||
| | |||||
Model - ParisTailpiece Good quality Ebony tailpiece with an attractive Paris Eye insert. Works well with our fine tuners and matches the Paris Eye end button and pegs.
| ![]() |
||||
| | |||||
Model - ParisPegs Set of four good quality ebony pegs with an attractive Parish Eye on the end. A perfect match for our Paris Eye end button. These pegs will need fiting to the taper of your violin pegbox.
| ![]() |
||||
| | |||||
Model - BowHair A Hank of good quality White Mongolian bow hair. Just enough for one bow rehair. One end ready tied. 31" plus so suitable for 4/4 and shorter bows.
| ![]() |
||||
| | |||||
Model - DresdenChin Good quality Ebony chinrest made to the Dresden pattern. Slightly larger than average chinrest that needs careful fitting to the violin but is extremely comfortable for the larger person.
| ![]() |
||||
| | |||||
Model - RosePegParis Set of four Rosewood pegs with a Paris Eye at the end. These are made from very high quality wood and polished to a high finish. Would grace the best of violins.
| ![]() |
||||
| | |||||
Model - WittnerTail4/4 Wittner Ultra Light tailpiece with integrated fine tuners on all strings. Comes complete with a nylon tailgut with screw adjusters. Made from a special composite material combining strength with very low weight. 4/4 Full Size
| ![]() |
||||
| | |||||
Model - WittnerTail1/4 Wittner Ultra Light tailpiece with integrated fine tuners on all strings. Comes complete with a nylon tailgut with screw adjusters. Made from a special composite material combining strength with very low weight. 1/4 Size
| ![]() |
||||
| | |||||
Model - WittnerTail1/2 Wittner Ultra Light tailpiece with integrated fine tuners on all strings. Comes complete with a nylon tailgut with screw adjusters. Made from a special composite material combining strength with very low weight. 1/2 Size
| ![]() |
||||
| | |||||
Model - WittnerTail3/4 Wittner Ultra Light tailpiece with integrated fine tuners on all strings. Comes complete with a nylon tailgut with screw adjusters. Made from a special composite material combining strength with very low weight. 3/4 Size.
| ![]() |
||||
| | |||||
Model - EbFingerBoard Part finished finger board of A grade Ebony. Most of the work has been done it will just need final trimming before fitting to your violin.
| ![]() |
||||
| | |||||
Model - HillChinrest Well made Ebony chinrest made to the popular Hill design. Comes complete with mounting kit and a little tool to tighten the screws. Very comfortable rest.
| ![]() |
||||
| | |||||
Model - TekaChin4/4 Good Quality Ebony Chin Rest. Comes with the mounting hardware and even a little tool to tighten the barrel screws. A very comfortable rest that will fit the majority of full size violins
| ![]() |
||||
| | |||||
Model - FleschNewChin Well made Ebony chinrest to the New Flesch design. This chinrest fits over the tailpiece and provides a very comfortable support if you want your violin to be slightly higher up your shoulder.
| ![]() |
||||
| | |||||




































